Konica Minolta bizhub C3850FS bizhub C3850FS/C3850/C3350 Applied Functions Use - Page 68
[SNMP Settings], Network] - [SNMP Settings] - [SNMP Settings]
View all Konica Minolta bizhub C3850FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
1.5 Available operations in Administrator mode 1 [SNMP Settings] To display: Administrator mode - [Network] - [SNMP Settings] - [SNMP Settings] Configure the settings for obtaining the machine information and monitoring the machine using SNMP (Simple Network Management Protocol). Item [SNMP Settings] [SNMP] [SNMP v1/v2c (IP)] [SNMP v3 (IP)] [UDP Port] [SNMP v1/v2c Settings] [Read Community Name] [Write] [Write Community Name] Description Configure the SNMP settings. Select whether or not to use SNMP. [Enable] is specified by default. Select whether or not to use SNMP v1 or SNMP v2. [Enable] is specified by default. Select whether or not to use SNMP v3. [Enable] is specified by default. If necessary, change the UDP port number. [161] is specified by default. Configure the SNMP v1/v2c settings. Enter a read-only community name (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and #). [public] is specified by default. Select whether or not to enable the read and write functions. [Enable] is specified by default. If [Write] is set to [Enable], enter the community name in the read-write enable state (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and #). [private] is specified by default. [Applied Functions] 1-62