Konica Minolta bizhub C451 bizhub C451 Network Scanner Operations User Manual - Page 218
If optional image controller IC-409 has been installed, this parameter is
View all Konica Minolta bizhub C451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Specifying Utility mode parameters 3 2 Touch [TWAIN Lock Time]. 3 Press the [C] (clear) key to erase the value, and then use the keypad to specify the desired length of time (between 30 and 300 seconds). - If a value outside the allowable range is specified, the message "Input error" appears. Type a value within the allowable range. 4 Touch [OK]. The TWAIN lock time is set. 2 Note To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears. If optional image controller IC-409 has been installed, this parameter is not available. If access to this machine using KONICA MINOLTA TWAIN, control panel is locked. It is automatically unlocked at the specified time. C451 3-52