Konica Minolta bizhub C451 bizhub C451 Network Scanner Operations User Manual - Page 340
SNMP Settings, For details on Status Notification Setting, refer to Status Notification
View all Konica Minolta bizhub C451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
Network Settings 4 4.12 SNMP Settings Specify SNMP settings. Settings can be specified for the following. SNMP Setting screen 1/3 Parameter SNMP v1/v2c (IP) SNMP v3 (IP) SNMP v1 (IPX) Description Select whether or not SNMP v1/v2c (IP) is used. Select whether or not SNMP v3 (IP) is used. Select whether or not SNMP v1 (IPX) is used. SNMP Setting screen 2/3 Parameter UDP Port Number SNMP v1/v2c Settings SNMP v3 Settings Description Specify the UDP port number. To change the setting, press the [C] (clear) key, and then use the keypad to type in the desired port number. (Range: 1 to 65535) Specify the settings when v1 or v2c is selected. For details, refer to "SNMP v1/v2c Settings" on page 4-97. Specify the settings when v3 is selected. For details, refer to "SNMP v3 Settings" on page 4-100. SNMP Setting screen 3/3 Parameter Permission Settings TRAP Setting When Authentication Failed Description Select whether to permit or prohibit TRAP. Select whether or not to enable TRAP when authentication failed. ! Detail If an IP address or IPX address is specified with "Status Notification Setting", use the TRAP function with SNMP. Set "TRAP Setting" on the SNMP Setting screen to "Allow". For details on "Status Notification Setting", refer to "Status Notification Setting" on page 4-124. 1 Touch [5 Network Setting] in the Administrator Settings screen. - For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator Settings screen" on page 3-7. 2 Touch [8 SNMP Settings] in the Network Settings screen. SNMP Setting screen 1/3 appears. C451 4-95