Konica Minolta bizhub C754 bizhub C654/C754 Fax Operations User Guide - Page 50
Sending a fax after specifying a relay station ([F-Code TX]), Relay distribution, Operation flow
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4.6 Sending a fax after specifying a relay station ([F-Code TX]) 4 4.6 Sending a fax after specifying a relay station ([F-Code TX]) Relay distribution The Relay Distribution function sends a fax to a relay machine, which distributes the received fax to a preregistered group of destinations. Overall communications costs can be reduced by grouping relay stations and destinations by area, compared to the case in which faxes are broadcast to all destinations. This function is useful when broadcasting faxes to distant locations. Tips - The destination machine (the relay machine) needs to have the F-code function. - You need to check both the Relay User Box number specified on the relay machine and the password for relay distribution. - This function cannot be used together with the following functions: - Password TX, Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board). Related setting (for the administrator) - You can enable or disable F-Code TX (Default: [ON]). For details, refer to page 11-20. d Reference This machine can also be used as a relay station. For details, refer to [User's Guide: Box Operations]. Operation flow 1 Load the original. 2 Tap [Scan/Fax]. 3 Specify the fax number of the relay station. 4 Tap [Application] - [Fax Setting] - [F-Code TX], then tap [ON]. bizhub C754/C654 4-10