Konica Minolta magicolor plus magicolor plus Captureboard C-12 Series Tool Box - Page 7

Installation of the Software Note * The Windows Security dialog box will be displayed with Windows Vista. Select "Install this driver software (I)". * When using Windows Vista, each time the installer is started, the User Account Control dialog box is displayed. Select "Continue" and continue with the installation. Click "Finish". The "Installer Information Dialog Box" will be displayed. Click "Yes" and restart the personal computer. When this software is installed on the personal computer for the first time, continue to make the following connections and operations. ■ Installing the USB Driver The USB driver is installed on the computer with the installer, but this does not complete association with the USB port. In order to use PLUS TOOLBOX, install using the procedure described below with the Captureboard connected. Preparation 1. Press the ON/Standby button of the Captureboard to turn on the power. 2. Use a USB cable to connect the USB port of the personal computer with the PC dedicated USB port of the Captureboard. (See Page E-5) The New Hardware Search Wizard will be displayed. Install according to the New Hardware Search Wizard. Continue on next page E-7