Konica Minolta pagepro 1380MF pagepro 1380MF User Manual English - Page 30

Media storage How do I store media? „ Keep media on a flat, level surface in its original wrapper until it is time to load it. Media that has been stored for a long time out of its packaging may dry up too much and cause misfeeding. „ If media has been removed from its wrapper, place it in its original packaging and store in a cool, dark place on a level surface. „ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35°C [95°F]), and dust „ Avoid leaning against other objects or placing it in an upright position. Before using stored media, do a trial print and check print quality. Loading media How do I load media? Take off the top and bottom sheets of a ream of paper. Holding a stack of approximately 200 sheets at a time, fan the stack to prevent static buildup before inserting it in a tray. " Do not fan transparencies. Note Although this machine was designed for printing on a wide range of media types, it is not intended to print exclusively on a single media type except plain paper. Continuous printing on media other than plain paper (such as envelopes, thick stock, or transparencies) may adversely affect print quality or reduce engine life. When refilling media, first remove any media remaining in the tray. Stack it with the new media, even the edges, then reload it. Do not mix media of different types and sizes, as this will cause media misfeeds. 32 Media storage