Konica Minolta pagepro 1380MF pagepro 1380MF User Manual English - Page 58

Entering Copy mode, Loading original documents to copy, To place a document onto the flatbed glass

Get Konica Minolta pagepro 1380MF PDF manuals and user guides View all Konica Minolta pagepro 1380MF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Entering Copy mode Before making copies, make sure that is lit in green. Otherwise, press to enter Copy mode. Copy mode is the default setting. Loading original documents to copy To place a document onto the flatbed glass 1 Remove all documents from the ADF (if it is installed). " If you are using the flatbed to scan, do not load any documents into the ADF. 2 Lift the document cover or ADF lid. 3 Place the original document face down on the flatbed glass and align its center with the arrow mark on the glass. Arrow Mark 4 Gently close the document cover or ADF lid. Closing it too quickly may cause the document to move on the flatbed glass. 5 Customize the copy settings by using the control panel buttons. Refer to "Setting copy options" on page 61. To cancel settings, press Stop/Reset. 6 Press Start to begin copying. To load documents into the optional ADF input tray " Do not open the ADF lid while documents loaded into the ADF are being scanned. 1 Make sure that there is no document on the flatbed glass. 60 Entering Copy mode

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Entering Copy mode
60
Entering Copy mode
Before making copies, make sure that
is lit in green. Otherwise, press
to enter Copy mode. Copy mode is the default setting.
Loading original documents to copy
To place a document onto the flatbed glass
1
Remove all documents from the ADF (if it is installed).
If you are using the flatbed to scan, do not load any documents into
the ADF.
2
Lift the document cover or ADF lid.
3
Place the original document face down on the flatbed glass and align its
center with the arrow mark on the glass.
4
Gently close the document cover or ADF lid. Closing it too quickly may
cause the document to move on the flatbed glass.
5
Customize the copy settings by using the control panel buttons. Refer to
“Setting copy options” on page 61. To cancel settings, press Stop/Reset.
6
Press Start to begin copying.
To load documents into the optional ADF input tray
Do not open the ADF lid while documents loaded into the ADF are
being scanned.
1
Make sure that there is no document on the flatbed glass.
Arrow Mark