Konica Minolta pagepro 1390MF pagepro 1390MF User Manual English - Page 35

Envelopes, Use envelopes that are, Capacity, Media Tray, Manual Feed, Orientation, Driver, Weight - windows 7 drivers

Page 35 highlights

Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper-the front, back, and flap. Anything printed in these layered regions may be lost or faded. Capacity Media Tray Up to 10 envelopes, depending on their thickness Manual Feed 1 sheet only Tray Orientation Face up Driver Envelope Media Type Weight 91 to 163 g/m² (25 to 43 lb bond) Use envelopes that are „ Common office envelopes with diagonal joints, sharp folds and edges, and ordinary gummed flaps " Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „ Approved for laser printing „ Dry DO NOT use envelopes that have „ Sticky flaps „ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „ Transparent windows „ Too rough of a surface „ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „ Been presealed Media Types 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114

Media Types
23
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
Common office envelopes with diagonal joints, sharp folds and edges,
and ordinary gummed flaps
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Approved for laser printing
Dry
DO NOT use envelopes that have
Sticky flaps
Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
Transparent windows
Too rough of a surface
Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
Been presealed
Capacity
Media Tray
Up to 10 envelopes, depending on their
thickness
Manual Feed
Tray
1 sheet only
Orientation
Face up
Driver
Media Type
Envelope
Weight
91 to 163 g/m² (25 to 43 lb bond)