Kyocera Ai2310 3010/2310 Instruction Handbook - Page 29
Staple key Indicator
View all Kyocera Ai2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
, */Language key (Press to set copy management, default settings and language selection.) Œ Program key (Press to copy according to programmed settings. See page 92.) „ Staple key (Indicator) (Press to staple copies finished with the optional finisher. The indicator is lit while the staple mode is ON. See page 130.) ´ Sort key/Sort indicator/Group indicator (Press to sort copies into separate sets, or for sorting or grouping copies with optional finisher. The indicator will light in either mode.) q Initial mode (at the end of warm-up or when the Reset key is pressed) In the initial mode, paper of the same size as the original is selected automatically ("auto paper selection mode"), the number of copies is set to "1", "manual exposure mode" is set for the copy exposure mode and copy quality is set to "Text & Photo" mode. * It is also possible to change the copy exposure mode from "manual exposure mode" to "auto exposure mode" in the initial mode. (See "1 Exposure mode" on page 113.) q Auto clear function About 90 seconds after copying stops, the copier will automatically return to the same settings as those after warm up. (However, the exposure mode will not change.) Copying can be performed at the same settings (copy mode, number of copies and exposure mode) if copying is started before the auto clear function kicks in. q Automatic drawer switching function If two drawers contain the same size of paper and the paper in one drawer runs out during copying, this function switches paper feed from the empty drawer to the full drawer. * The automatic drawer switching function can be disabled. (See "1 Auto drawer SW" on page 122.) 24