Kyocera ECOSYS P2235dn Kyocera Command Center RX User Guide Rev-9.2016.6 - Page 66
IPv4 settings Wired Network, Do Not Use Proxy for Following Domains
View all Kyocera ECOSYS P2235dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Network Settings Do Not Use Proxy for Following Domains Enter the domain address which do not use the proxy. Use a semicolon (;) between multiple addresses. 3. Click Submit button. IPv4 settings (Wired Network) 1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings page opens. 2. This section includes the following items for configuration. DHCP/BOOTP Specifies whether or not to automatically obtain an IP address using DHCP or BOOTP. Auto-IP When the Auto-IP is set to On, the IP address from 169.254.0.1 through 169.254.255.254 will usually be generated by itself. But if the IP address using DHCP server or Manual settings has been decided and becomes a candidate as the result of configuration, the Auto-IP address isn't generated and decided even when the Auto-IP is set to On. If the IP address has already been entered in IP Address using Manual settings, delete the address. To enable the settings, restart network. Automatically-generated IP address appears on Confuguration page under Device Information on navigation menu. IP Address If DHCP/BOOTP is set to Off, then a static IPv4 address can be entered in this field as part of the system network settings. When DHCP/BOOTP is set to On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. The format of the IPv4 address is a sequence of numbers separated by dots. For example: 192.168.110.171 Subnet Mask Specifies the subnet mask. When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. Domain Name Specifies the domain name of the domain to which the printing system belongs. It should not contain the host printer name, for example, "abcde.com". abcde.com. When DHCP/BOOTP is turned On, a dynamic IPv4 address is assigned to the device, and the field is grayed out. 3. Click Submit button. IPv4 settings (Wireless Network) 1. Click TCP/IP under Network Settings on the navigation menu. The TCP/IP Settings page opens. 2. This section includes the following items for configuration. 62 Embedded Web Server