Kyocera ECOSYS P2235dn Kyocera Command Center RX User Guide Rev-9.2016.6 - Page 78

Network Settings To configure the SNMPv3 protocol, go to the SNMP Settings page under Management Settings. 3. HTTP: HTTP is the protocol to exchange or transfer hypertext between the World Wide Web and web browsers. To enable the HTTP protocol, turn this item On. Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for HTTP protocol. 4. HTTPS: HTTPS (Hypertext Transfer Protocol Secure) is a widely-used communications protocol for secure communication over the Internet. It provides bidirectional encryption of communications between a client web browser and a web server. To enable the HTTPS protocol, turn this item On. To enable this item, activate SSL on the Network Security Settings page under Security Settings. The current status of the certificate is shown in HTTPS Certificate. To make advanced settings, click Settings button and select a device certificate. Click Submit button to finalize settings. Configure the device certificate on the Certificates page under Security Settings. This Certificate can be used in common with IPP over SSL and HTTPS. 5. Enhanced WSD: Enhanced WSD is an API to simplify connections to web service enabled devices, such as Printers, Scanners and File Shares. To enable Enhanced WSD, turn this item On. Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for Enhanced WSD protocol. 6. Enhanced WSD over SSL: Enhanced WSD (SSL) is a communication security protocol that provides encryption, authentication, and anti-tampering integrity over the Internet. To enable Enhanced WSD (SSL), turn this item On. To enable this item, activate SSL on the Network Security Settings page under Security Settings. Available Network: Select Wired Network, Wi-Fi and Wi-Fi Direct as the available network for Enhanced WSD over SSL. Enhanced WSD over SSL Certificate: The status of the Enhanced WSD over SSL certificate is shown. To make advanced settings, click Settings button and select a device certificate. Click Submit button to finalize settings. Configure the device certificate on the Certificates page under Security Settings. 7. LDAP: The printing system can refer to the address book which is on the LDAP server as an external address book and assign a FAX number and E-mail address to the destination. To enables the LDAP protocol, turn this item On. To configure the External Address Book, go to the External Address Book Settings page under Address Book. To configure advanced settings, go to Authentication Settings page under Management Settings. Select a method for LDAP Security from STARTTLS, SSL/TLS, and Off on either the External Address Book # or Network Authentication drop-down list. To enable this item, activate SSL on the Network Security Settings page under Security Settings. 8. IEEE802.1X: IEEE802.1X is a security protocol that allows login to the secured networks based on a client certificate. To enable the IEEE802.1X protocol, turn this item On. To make advanced settings, click Settings button. The status of this protocol is shown in IEEE802.1X Settings page. This section includes the following items for configuration: IEEE802.1X Effective Encryption: Select a method of encryption from EAP-TLS, EAP-TTLS, EAP-FAST and PEAP(EAP-MS-CHAPv2) on the drop-down list. Tunneled Authentication Protocol: This protocol is activated when EAP-TTLS has been selected for encryption. Select a method of authentication from MSCHAPV2, MSCHAP, CHAP, and PAP on the drop-down list. Login User Name: Enter the name of the user to access the printing system. The IEEE802.1X client certificate of this user must be valid. 74 Embedded Web Server