Kyocera ECOSYS P3260dn P3260dn Operation Guide - Page 240

Troubleshooting > Troubleshooting S Message SD card error. ― Press [OK]. Checkpoints SSD error. ― Press [OK]. T Message The device cannot be connected because allowed connections would be exceeded. The file name already exists. You cannot copy. Checkpoints Are three handheld devices connected simultaneously? ― The user name is not ― registered. The waste toner box is full. The waste toner box is improperly installed. This account ID is already registered. Is the waste toner box full? ― ― This login user name ― already registered. Corrective Actions Reference Page An error has occurred on the SD ― card. Job is canceled. Select [OK]. The error cord is as follows. 04: Insufficient space on the SD card to complete this operation. Move data or delete unneeded data. An error has occurred on SSD. Job ― is canceled. Select [End]. The error cords are as follows. 01: The amount of data that can be saved at once has been exceeded. Turn the power OFF/ON. If the error still occurs, divide the file into smaller files. If the error occurs after the file is divided, the specified file may be damaged. Delete the file. 04: Insufficient space on SSD to complete this operation. Move data or delete unneeded data. Corrective Actions Reference Page Cancel a connection to a portable device that is not being used, or set the machine's auto disconnect time to break portable device connections. page 7-5 Copying is not possible because data with the same file name exists at the destination. Delete the data with the same file name at the destination before copying. page 5-10 The login user name entered is not registered. Check the login user name. page 9-3 Replace the waste toner box. page 10-9 The waste toner box is not installed page 10-9 correctly. Set it correctly. The account ID set has already been registered. Register a different account ID. page 9-17 The changed login user name has already been registered. Set a different login user name. page 9-3 10-22