Kyocera ECOSYS P3260dn P3260dn Operation Guide - Page 51
Command Center RX User Guide, DNS Server
View all Kyocera ECOSYS P3260dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing and Setting up the Machine > Network Setup When setting the DNS server In the following cases, set the IP address of DNS (Domain Name System) server. • When using the host name with "DHCP" setting set to [Off]. • When using the DNS server with IP address that is not assigned by DHCP automatically. 1 key > [DNS Server] > [OK] key 2 key > [Auto (DHCP)] or [Manual] > [OK] key When [Manual] is selected. You can enter static DNS server information in the Primary and Secondary fields provided. NOTE You can set any value between 000 and 255. Use the numeric keys or select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the position being entered, which is shown highlighted. IMPORTANT After changing the setting, restart the network from System Menu, or turn the machine OFF and then ON. Restart Network (page 8-26) NOTE Ask your network administrator for the IP address in advance, and have it ready when you configure this setting. In the following cases, set the IP address of DNS server on the Command Center RX. • When using the host name with "DHCP" setting set to "Off" • When using the DNS server with IP address that is not assigned by DHCP automatically. Setting the IP Address of the DNS Server, refer to the following: Command Center RX User Guide 2-18