Kyocera ECOSYS P7040cdn Kyocera Net Viewer Operation Guide Rev 5.4 2014.09 - Page 77
Communication Settings, Setting Device Communications, Network Interface Settings, Login user name
View all Kyocera ECOSYS P7040cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
6 Communication Settings Communication Settings control the network communications with each device. Available settings vary depending on the model and can include Network interface settings, Secure protocol settings, Login, Account polling settings, and Device polling settings. Note: If authentication is enabled on the device, the Login user name and Password must be set correctly in the Communication Settings dialog box for access to device features, such as Address Book, Users, or Document Box. Setting Device Communications You can view or change the network interface settings, polling and protocol settings, and login information in the Communication Settings dialog box for the selected device. 1 In any Device view or Accounting devices view, select a device. 2 In the Device menu, click Communication settings. 3 In the Communication Settings dialog box, type or modify the available settings. 4 Click OK. Network Interface Settings This section displays settings for each network interface card attached to the device. You can select the primary network card and edit select settings including TCP/IP port, communication timeout, administrator password and SNMP communication settings. You can enter the communication settings for the devices from the following options. Available options vary by model. TCP/IP port Type the value that matches what is set on the device. The valid range for port numbers is 1024 to 65535. Communication timeout (seconds) The number of seconds the application tries to establish a connection with the device. SNMP communication retries The number of retries to establish communication with the device after a communication failure. Command Center administrator password KYOCERA Net Viewer 5.4 6-1