Kyocera ECOSYS P8060cdn Data Security Kit E Operation Guide Rev-2016.1 - Page 11

Changing Security Functions

Page 11 highlights

Changing Security Functions Changing Security Password Enter the security password to change security functions. You can customize the security password so that only the administrator can use the security kit. Use the procedure below to change the security password. 1 Select the [System Menu/Counter] key. 2 Select [System/Network]. 3 If user login is disabled, the user authentication screen appears. Enter your login user name and password and then select [Login]. For this, you need to log in with administrator privileges. Refer to the machine's Operation Guide for the default login user name and password. 4 Select [Next] of Data Security. 5 Select [Next] of Hard Disk Initialization. System/Network - Security Password Set password. Enter new password, then re-enter it to confirm. Password Confirm Password NOTE: When a hard disk is not installed, "SSD Initialization" is displayed. When a hard disk and an SSD are installed, "Hard Disk/SSD Initialization" is displayed. 6 Enter the default security password, 000000. 7 Select [Change] of Security Password. 8 Select [Password] to enter a new security password 6 to 16 alphanumeric characters and symbols. # Keys # Keys Cancel OK 10/10/2015m013009:0180 CAUTION: Avoid any easy-to-guess numbers for the security password (e.g. 11111111 or 12345678). 9 Select [Confirm Password] to enter the same password again. 10 Select [OK]. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

10
Changing Security Functions
Changing Security Password
Enter the security password to change security functions. You can customize the security password so that only
the administrator can use the security kit.
Use the procedure below to change the security password.
1
Select the [
System Menu/Counter
] key.
2
Select [System/Network].
3
If user login is disabled, the user authentication
screen appears. Enter your login user name and
password and then select [Login]. For this, you
need to log in with administrator privileges. Refer to
the
machine's Operation Guide
for the default login
user name and password.
4
Select [Next] of
Data Security.
5
Select [Next] of
Hard Disk Initialization.
NOTE:
When a hard disk is not installed, ”SSD
Initialization” is displayed. When a hard disk and an
SSD are installed, "Hard Disk/SSD Initialization" is
displayed.
6
Enter the default security password,
000000
.
7
Select [Change] of
Security Password.
8
Select [Password] to enter a new security
password 6 to 16 alphanumeric characters and
symbols.
CAUTION:
Avoid any easy-to-guess numbers for the
security password (e.g. 11111111 or 12345678).
9
Select [Confirm Password] to enter the same
password again.
10
Select [OK].
Cancel
OK
Set password.
Enter new password, then re-enter it to confirm.
10/10/2015
10:10
m030908
Password
Confirm
Password
# Keys
# Keys
System/Network - Security Password