Kyocera FS 1100 FS-1100/1300D Operation Guide Rev-1.2 (Basic) - Page 94
Installing the Memory Module, Remove the memory module from its package.
View all Kyocera FS 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Installing the Memory Module 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the right cover with a piece of metal similar to coin. 3 Remove the fixing tape in case of the first installation. Then, remove the memory slot cover as shown in the figure. 4 Push out the clamps on both ends of the memory socket. 5 Remove the memory module from its package. 6 Aligning the cutouts of the memory module with the matching keys of the socket, carefully plug the memory module into the memory socket until it clicks in place. 6-4 Option
6-4
Option
Installing the Memory Module
1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the right cover with a piece of metal similar to coin.
3
Remove the fixing tape in case of the first installation. Then, remove
the memory slot cover as shown in the figure.
4
Push out the clamps on both ends of the memory socket.
5
Remove the memory module from its package.
6
Aligning the cutouts of the memory module with the matching keys of
the socket, carefully plug the memory module into the memory
socket until it clicks in place.