Kyocera FS-1300DN Operation Guide - Page 85
Inside the Printer
View all Kyocera FS-1300DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Inside the Printer 1 Pull the paper cassette all the way out of the printer. Remove any partially fed paper.. IMPORTANT Do not try to remove paper that has already been partially fed. Proceed to step 2. 2 Open the top cover and front cover, and lift the process unit together with the toner container out of the printer. 3 Remove the drum unit from the printer by holding the green levers with both hands. CAUTION The fuser unit inside the printer is hot. Do not touch it, as it may result in burn injury. Note The drum is sensitive to light. Never expose the process unit to light for more than five minutes. 4 If the jammed paper appears to be pinched by rollers, pull it along the normal running direction of the paper. Troubleshooting 5-13
Troubleshooting
5-13
Inside the Printer
1
Pull the
paper cassette
all the way out of the printer. Remove any
partially fed paper..
2
Open the
top cover
and
front cover
, and lift the
process unit
together
with the
toner container
out of the printer.
3
Remove the
drum unit
from the printer by holding the green levers
with both hands.
4
If the jammed paper appears to be pinched by rollers, pull it along
the normal running direction of the paper.
IMPORTANT
Do not try to remove paper that has already been
partially fed. Proceed to step 2.
CAUTION
The fuser unit inside the printer is hot. Do not
touch it, as it may result in burn injury.
Note
The drum is sensitive to light. Never expose the process
unit to light for more than five minutes.