Kyocera FS-1300DN Operation Guide - Page 92
Installing the Memory Module, on both ends of
View all Kyocera FS-1300DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Installing the Memory Module 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the right cover with a piece of metal similar to coin. 3 Remove the fixing tape in case of the first installation. Then, remove the memory slot cover as shown in the figure. 4 Push out the clamps on both ends of the memory socket. 5 Remove the memory module from its package. 6 Aligning the cutouts of the memory module with the matching keys of the socket, carefully plug the memory module into the memory socket until it clicks in place. 6-4 Option
6-4
Option
Installing the Memory Module
1
Turn off the printer and disconnect the
power cord
and
printer cable
.
2
Remove the
right cover
with a piece of metal similar to coin.
3
Remove the fixing tape in case of the first installation. Then, remove
the
memory slot cover
as shown in the figure.
4
Push out the
clamps
on both ends of the
memory socket
.
5
Remove the
memory module
from its package.
6
Aligning the cutouts of the
memory module
with the matching keys of
the socket, carefully plug the
memory module
into the
memory
socket
until it clicks in place.