Kyocera FS 3830N FS-3820N/3830N Installation Guide Rev 1.1 - Page 30

Options The following options are available for the printer. 1 Sorter (SO-60) 2 Rear Tray Printer 4 Envelope feeder (EF-60) 3 Network Interface Card (3.3 V DC) or Serial Interface Board Kit (IB-11) 5 Duplexer (DU-61) 6 Paper feeder (PF-60) OInrsdtearllaotfion 1 Sorter (SO-60) Equipped with five trays each with 200 sheets capacity. Performs sorting, collating, and mailbox function. Attaches to the top of the printer. 2 Rear Tray It attaches to the rear of the printer. 3 Network Interface Card (IB-20/21E/22) Insert the card into the option interface slot at the rear of the printer. The printer can be used on network environments including Windows, Macintosh, UNIX, NetWare, etc. Serial lnterface Board Kit (IB-11) Connect to the computer's serial printer port with a serial cable. 4 Envelope Feeder (EF-60) Holds more envelopes at a time than the MP tray. This envelope feeder can be attached to the front of the printer after the MP tray has been removed. 5 Duplexer (DU-61) Performs duplex printing for short edge and long edge binding. Attaches to the bottom of the printer. 6 Paper Feeder (PF-60) Holds approximately 500 sheets of A5 to A4/Letter and Legal size paper. Up to three paper feeders can be attached to the bottom of the printer unit. Other Options • Paper Cassette (PC-60LG) Holds A5 to A4/Letter and Legal size paper. • Bulk Paper Feeder (PF-8E) Holds approximately 2,000 sheets of 76 to 216 mm (3 to 8-1/2") × 148 to 305 mm (5-13/16 to 12") size paper. This bulk paper feeder can be attached to the front of the printer after the MP tray has been removed, but can only be installed on the FS-3830N. • Memory DIMM, CompactFlash™ card, Microdrive™ (Hard Disk Unit) See your dealer for purchasing information of these optional devices that are best suited for use with this printer. Printer combined with options 28