Kyocera FS C5020N FS-C5020/C5030 Operation Guide (Basic Edition) - Page 53
Cleaning the Advanced Beam Array Lenses
View all Kyocera FS C5020N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Maintenance 6 Gently pull the main charger handle out and push it back in. Repeat this 2 to 3 times. These movements clean the grid. After cleaning, make sure you restore the main charger unit to its home position. Main Charger Unit NOTE: If the main charger unit is not restored to its home position, the corresponding color will be printed over the whole page. 7 Remove the grid cleaner from the printer and discard it. The grid cleaner cannot be reused. Use the same procedure to clean the main charger units for the other toner containers. Proceed to the next section and clean the advanced beam array lenses. Cleaning the Advanced Beam Array Lenses If lines, etc., appear on printed copies, the printouts appear dirty, or faint or blurred printouts are produced, clean the advanced beam array lenses. There is 1 lens on the main charger unit of each toner container. The following example explains the procedure to clean the lens on the main charger unit of the black toner container. BASIC OPERATION GUIDE 4-11