Kyocera FS C5030N Product Guide - Page 16

EcoPower Sleep Mode, Throughput Capabilities, Multi-Purpose Tray MPT, MPT First Mode Automatic

Page 16 highlights

FS-C5020N and FS-C5030N Product Guide FS-C501260N and FS-C5030N Key Features EcoPower (Sleep Mode) The FS-C5020N and FS-C5030N have a built-in a power-saving feature called EcoPower - the period of time before the FS-C5020/30N enters a power-saving or "Sleep" Mode. Adjustable from the Operation Panel or from the workstation, the FS-C5020/30N is configured with a default factory setting of 15 minutes. In addition to turning this feature "off", users can adjust this setting from a range of 5 minutes to 240 minutes, in 5-minute increments. Throughput Capabilities Corporate Color users are increasingly more demanding of Color imaging equipment. Features such as multiple paper sources, combined with the ability to print onto a wider range of paper stock, sizes, and weights are becoming key buying criteria with potential buyers. Multi-Purpose Tray (MPT) The MPT capacity is approximately 100 sheets. Stocks up to 110lb Index ranging in size from 2.8" x 5.8" to 8.5" x 14" can be fed through this paper source. MPT First Mode (Automatic Feeding from MPT) Activation of this feature assigns highest priority to paper fed from this tray. If the MPT contains paper, the first sheet is always selected and fed from this tray, even when a user specifies paper to be fed from another tray. Once the MPT paper supply is depleted, paper is taken from the original drawer selected in the Driver when the job was sent to the Printer. Duplexing from the MultiPurpose Tray is only available in First Mode. The MPT paper size and paper type must be the same as those of the current paper cassette or a paper jam may occur. Note: First Mode is NOT the Default Factory Setting. Multiple Interfaces Mean Flexibility The multiple interfaces available on the FS-C5020/30N makes this printer very useful in corporate workgroups. The FS-C5020/30N has a Hi-Speed USB2.0 Port allowing users to easily connect a laptop PC anytime and print without rebooting. Using the standard networking capability of the FS-C5020/30N, users can print directly from the Internet or print an eMail attachment using POP3 functionality. This means a salesperson traveling overseas can print to either the FS-C5020N or the FS-C5030N in their US office through the internet using the device's IP Address. In addition to these standard interfaces, the optional IB-22 Wireless Networking Board allows Printing without troublesome cabling. This all adds up to a flexible, full-color corporate resource that no business should be without. - 16 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

EcoPower (Sleep Mode)
The FS-C5020N and FS-C5030N have a built-in a power-saving feature called
EcoPower - the period of time before the FS-C5020/30N enters a power-saving
or “Sleep” Mode.
Adjustable from the Operation Panel or from the workstation,
the FS-C5020/30N is configured with a default factory setting of 15 minutes. In
addition to turning this feature “off”, users can adjust this setting from a range of
5 minutes to 240 minutes, in 5-minute increments.
Throughput Capabilities
Corporate Color users are increasingly more demanding of Color imaging
equipment.
Features such as multiple paper sources, combined with the ability
to print onto a wider range of paper stock, sizes, and weights are becoming key
buying criteria with potential buyers.
Multi-Purpose Tray (MPT)
The MPT capacity is approximately 100 sheets.
Stocks up to 110lb Index ranging
in size from 2.8" x 5.8" to 8.5" x 14" can be fed through this paper source.
MPT First Mode (Automatic Feeding from MPT)
Activation of this feature assigns highest priority to paper fed from this tray.
If
the MPT contains paper, the first sheet is always selected and fed from this tray,
even when a user specifies paper to be fed from another tray.
Once the MPT
paper supply is depleted, paper is taken from the original drawer selected in the
Driver when the job was sent to the Printer. Duplexing from the MultiPurpose
Tray is only available in First Mode.
The MPT paper size and paper type must
be the same as those of the current paper cassette or a paper jam may occur.
Note:
First Mode is NOT the Default Factory Setting.
Multiple Interfaces Mean Flexibility
The multiple interfaces available on the FS-C5020/30N makes this printer very
useful in corporate workgroups.
The FS-C5020/30N has a Hi-Speed USB2.0
Port allowing users to easily connect a laptop PC anytime and print without
rebooting.
Using the standard networking capability of the FS-C5020/30N,
users can print directly from the Internet or print an eMail attachment using
POP3 functionality.
This means a salesperson traveling overseas can print to
either the FS-C5020N or the FS-C5030N in their US office through the internet
using the device’s IP Address.
In addition to these standard interfaces, the
optional IB-22 Wireless Networking Board allows Printing without troublesome
cabling.
This all adds up to a flexible, full-color corporate resource that no
business should be without.
FS-C5020N and FS-C5030N Product Guide
- 16 -
FS-C5020N and FS-C5030N Key Features