Kyocera FS-C5300DN FS-C5100DN/C5200DN/C5300DN Operation Guide Rev-1.2 (BASIC) - Page 29

ID _ Password _ 3 Press Z. Each time you press U or V, the selection changes. Refer to the explanations below when specifying the settings. If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec to connect to a network, you must enter an administrator ID. By default, the administrator ID is the numeric part of your printer's model name. If you use FS-C5300DN, enter "5300". If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec to connect to a network, you must enter an administrator password. By default, the administrator password is the numeric part of your printer's model name. If you use FS-C5300DN, enter "5300". >NetWare On Set this item to On when you connect to a network using NetWare. In > submenu, frame mode can be selected from Auto, 802.3, Ethernet-II, SNAP and 802.2. >AppleTalk On AppleTalk must be activated (On) for networking with Macintosh computers. >IPP Off Set this item to On when you connect to a network using IPP. >SSL Server > Off Set this item to On when you connect to a network using SSL Server. Submenu has items including DES, 3DES, AES, IPP over SSL and HTTPS. >IPSec Off Printing Operation Set this item to On when you connect to a network using IPSec. Continued on next page. 2-5