Kyocera KM-2030 Print System K Instruction Handbook (Setup)
Kyocera KM-2030 Manual
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-2030 manual content summary:
- Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 1
INSTRUCTION HANDBOOK ALWAYS read this Instruction Handbook thoroughly before use. After reading, maintain it in good condition and keep it together with the Instruction Handbook for your copier. - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 2
- Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 3
Corporation. All other company and product names contained in this Instruction Handbook are trademarks or registered trademarks of their respective companies. ® will not be used in this handbook. All rights reserved. No part of this material may be reproduced or transmitted in any form or by - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 4
to you. SUPPLEMENT TO AGREEMENT FOR SOFTWARE BUNDLING AND DISTRIBUTION FOR ALDC 3. developer of Programs supplied to IBM. IBM's and the developer's limitations of remedies are not cumulative. Such developer arose. If you acquired the Program in the United States, this license is governed by the laws - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 5
20 pages/minute (w/ full message display). About the On-Line Manual The On-Line Manual for this Instruction Handbook is a PDF (Portable Document Format) file and is located on the CD-ROM that is included with this product. The Adobe Acrobat Reader software is required in order to access the On-Line - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 6
cable Page 5 Parallel cable 2 Installing the printer driver into your PC computer ... Refer to the On-Line Manual CD-ROM When connecting the printer to a network (the optional Network Card must be installed)... Hub 1 Connecting a network cable (100Base-TX, 10Base-T, etc - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 7
Name of parts (operation panel) ...3 2. Set-up ...5 2-1 Connecting the printer cable ...5 2-2 Installing the software ...5 2-3 Network (TCP/IP) settings ...6 3. Troubleshooting ...9 3-1 Canceling printing ...9 3-2 When an error code or error messages appears 10 3-3 Basic troubleshooting chart ...14 - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 8
Accessories • 1 CD-ROM • This Instruction Handbook 1-2 Required items • Parallel cable 1-3 Name of parts (main body) 1 Parallel interface connector Connect a bi-directional parallel cable here. 2 Memory Card (CompactFlash) slot Insert the optional Memory Card (CompactFlash) here. 3 Main switch Turn - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 9
information, refer to the On-Line Manual. Prt "Prt" and "E##" will alternately flash when a printer error occurs. (The corresponding error number will be displayed in place of the ##.) For more detailed information, refer to "3-2 When an error code or error E## messages appears..." on page 10. Prt - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 10
feed. This key is also used to switch the printer on- and off-line. When the printer is on-line, the Data On-line indicator will be lit. ! "CANCEL" command Select this command when you want to stop printing or you want to clear an error message. @ "MENU" command Select this command when you - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 11
on installing the required software, refer to the On-Line Manual that is located on the CD-ROM that is included with this product. 2 Connect the printer cable to the parallel interface connector located at the back of the right side of the printer. * If the optional Network Card is installed in the - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 12
(TCP/IP) settings When the optional Network Card is installed and this machine is to be used as a network printer, it is necessary to set the corresponding IP address for the printer. * To perform this setting for the 20 ppm copier, proceed to page 7. Notes • The IP address that should be registered - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 13
* To cancel the setting midway through it, press the Stop/Clear key. 1 Press the Printer key. The machine will switch to the printer mode. 2. Set-up 6 Use the M and N cursor keys to select "On" and then press the Enter key. 2 Use the M and N cursor keys to select "MENU" - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 14
, once the IP address has been entered, press the Enter key. 18 Once you are finished making all of the network settings, press the Printer key. The machine will switch back to the copier mode. 14 Use the M and N cursor keys to select "Subnet Mask" and then press the Enter key. 15 Repeat - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 15
3. Troubleshooting 3-1 Canceling printing Perform the following procedure when you want to stop printing or you want to clear data. IMPORTANT! • By performing this operation you will be canceling ALL print jobs that are currently waiting in the printer's memory to be printed. • Always cancel the - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 16
When an error code or error messages appears... If an error code or message appears on the operation panel, first check the following tables for cause of the trouble and then perform the corresponding procedure. For more detailed information, refer to the Instruction Handbook for your copier as well - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 17
paper from the Job Separator. Trouble has occurred within the printer. Contact your service representative or an authorized service center. The department code you entered does not match the registered one. Check the department code that is registered in the printer driver. The amount of printing - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 18
3. Troubleshooting Error code (15 ppm copier) Display message (20 ppm copier) E80 Print overrun E82 Memory overflow E83 Interface occupied EF1 checksum error Procedure A data overrun error has occurred due to insufficient memory. • If you want to force-continue the print - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 19
Error code (15 ppm copier) Display message (20 ppm copier) EF2 RAM error 3. Troubleshooting Procedure An error has been detected during operation. Turn the main switch to the printer OFF (O) and then back ON ( | ) again. If the same error message remains, contact your service representative or - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 20
. If trouble persists, contact your service representative or an authorized service center. * For information in regard to general mechanical trouble with the machine, refer to the Instruction Handbook for your copier. Problem Nothing is printed out Text is not printed correctly Print out is - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 21
4. Specifications CPU PowerPC 405 (200MHz) Printing Speed 15 ppm copier: WITHOUT Memory Board installed - 15 pages/min (A4 [8 1/2" x 11"]) WITH Memory Board installed - 18 pages/min (A4 [8 1/2" x 11"]) 20 ppm copier: 20 pages/min (A4 [8 1/2" x 11"]) Printing Resolution With smoothing OFF: 600 dpi - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 22
MW - Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 23
- Kyocera KM-2030 | Print System K Instruction Handbook (Setup) - Page 24
2000. 9 3BK80050A
INSTRUCTION HANDBOOK
<Set-up Edition>
ALWAYS read this Instruction Handbook thoroughly before use. After reading, maintain it in good condition
and keep it together with the Instruction Handbook for your copier.