Kyocera KM-2030 Print System K Instruction Handbook (Setup) - Page 5

About this Instruction Handbook This Instruction Handbook is meant to be read when the Printer Board is installed in your copier and the copier is to be used mainly as a local printer. It contains explanations on set-up procedures for using the copier as a printer. As the required set-up and configurations for the printer may differ depending upon the environment in use in the connected computer, please read those sections related to your specific computer environment and perform the appropriate set-up and configuration explained there. This handbook should also be read and used together with the On-Line Manual that is on the included CD-ROM. That On-Line Manual contains explanations on printing, performing certain settings and configurations, and the procedures required at your computer. When there is a reference in this Instruction Handbook to a 15 ppm copier, it refers to those machine with a copy speed of 15 pages/minute (w/ digital indicator display) and when there is a reference to a 20 ppm copier, it refers to those machine with a copy speed of 20 pages/minute (w/ full message display). About the On-Line Manual The On-Line Manual for this Instruction Handbook is a PDF (Portable Document Format) file and is located on the CD-ROM that is included with this product. The Adobe Acrobat Reader software is required in order to access the On-Line Manual. The installer for Adobe Acrobat Reader is also included on the CD-ROM so the software can be installed onto your hard disk from there. iii