Kyocera KM-2030 Print System K Instruction Handbook (Setup) - Page 14
Subnet Mask
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Set-up 11 The numeric keys will be used to enter the IP address: First, enter the first 3 digits of the IP address. * The numbers you enter will be input into the currently highlighted area of the display. 16 Use the M and N cursor keys to select "Gateway" and then press the Enter key. 12 Press the > cursor key and then enter the next 3 digits of the IP address into the next highlighted block. 17 Repeat steps 11 - 13 in order to enter the Gateway address using the same procedure that you did for entering the IP address. 13 Continue the same procedure for the other 2 blocks and, once the IP address has been entered, press the Enter key. 18 Once you are finished making all of the network settings, press the Printer key. The machine will switch back to the copier mode. 14 Use the M and N cursor keys to select "Subnet Mask" and then press the Enter key. 15 Repeat steps 11 - 13 in order to enter the Subnet Mask using the same procedure that you did for entering the IP address. 8