Kyocera KM-2560 2560/3060 Operation Guide (Basic Edition) - Page 41
Connecting Cables, Connecting LAN Cable (Optional)
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Preparation before Use Connecting Cables Connecting LAN Cable (Optional) Follow the steps below to connect a LAN cable to the machine. 2 1 When the machine is powered up, first press the Power key on the operation panel. Check that the Power indicator and the memory indicator are off. After this, turn off the main power switch. Check that the indicators are off. 2 Connect the LAN cable to the network interface located on right side of the body. 3 Connect the other end of the cable to the hub. 4 Configure the network. For details, refer to Configuring a Network (LAN Cable Connection) on page 2-10. OPERATION GUIDE 2-5
Preparation before Use
OPERATION GUIDE
2-5
2
Connecting Cables
Connecting LAN Cable (Optional)
Follow the steps below to connect a LAN cable to the machine.
1
When the machine is powered up, first press the
Power
key on the
operation panel. Check that the
Power
indicator and the memory indicator
are off. After this, turn off the main power switch.
2
Connect the LAN cable to the network interface located on right side of the
body.
3
Connect the other end of the cable to the hub.
4
Configure the network. For details, refer to
Configuring a Network (LAN
Cable Connection) on page 2-10
.
Check that the
indicators are off.