Kyocera KM-2560 2560/3060 Operation Guide (Basic Edition) - Page 70

Preparation before Use Loading Paper Paper can be loaded standardly in the two cassettes and the Multi Purpose Tray. A paper feeder is also available as an option (refer to Chapter 4 Optional Equipment). Before Loading Paper When you open a new package of paper, fan the sheets to separate them slightly prior to loading in the following steps. 2-34 1 Bend the whole set of sheets to swell them in the middle. 2 Hold the stack at both ends and stretch it while keeping the entire stack swelled. 3 Raise the right and left hands alternately to create a gap and feed air between the papers. 4 Finally, align the papers on a level, flat table. If the paper is curled or folded, straighten it before loading. Paper that is curled or folded may cause a jam. CAUTION: If you copy onto used paper (paper already used for copying), do not use paper that is stapled or clipped together. This may damage the machine or cause poor image quality. NOTE: If printouts are curled or not neatly stapled, turn the stack in the cassette upside down. Avoid exposing opened paper to high temperatures and high humidity as dampness can be a cause of problems. Seal any remaining paper after loading in the Multi Purpose Tray or cassettes back in the paper storage bag. If the machine will not be used for a prolonged period, protect all paper from humidity by removing it from the cassettes and sealing it in the paper storage bag. OPERATION GUIDE