Kyocera KM-3530 Fax System (F) Operation Guide - Page 38
Dialing with Abbreviated Numbers
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 1 Fax Operation (Basic Use) Dialing with Abbreviated Numbers Speed-dial keys are available to be registered as either a one-touch key, a group dial key, a program key or a chain dial key. Each of these keys is given a 3-digit number between 001 and 600 and this number is referred to as that key's "abbreviated number". It is then possible to dial a destination number by simply entering the corresponding abbreviated number. * Prior to operation, check the message display to make sure that the touch panel is in the initial mode for fax operation. (Refer to "(2) Initial Mode" on page 1-7.) * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Set the documents you want to transmit. 6 Use the keypad to enter the abbreviated number (001 - 600) that corresponds to the speed-dial key under which the desired fax number is registered. * Once a 3-digit number is entered, that number may be changed using the "+" and "-" keys. 7 Touch the "Close" key. The touch panel will return to the basic fax screen and the corresponding speed-dial key will be highlighted. 2 If you want to change the transmission conditions, such as the resolution and contrast, touch the "TX setting" key. If you do NOT want to change the current conditions, go directly to step 5. 8 Press the Start key. The transmission operation will begin automatically. 3 Touch the key that corresponds to the desired item and change the information as desired. (To change each transmission condition, refer to pages 1-16 and 1-17.) 4 Once you are finished changing transmission conditions, touch the "Abbrev." key and then go directly to step 6. 5 Touch the "Abbrev." key. (Inch) (Metric) 1-30