Kyocera TASKalfa 300i 300i Operation Guide - Page 245

Default Setting (System Menu) Paper Mismatch Error Select what to do when the selected paper size or type does not match paper size or type loaded in the specified paper source while printing from the computer by specifying the cassette or multi-purpose tray. Processing Ignore Display Error Description The setting is ignored and the job is printed. Error message to cancel printing is displayed. Use the procedure below to specify the settings for error handling. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Error Handling. 3 Press [Change] at the error you wish to change the handling. 4 Select the error handling method in the selection screen for each of the errors and then press [OK]. 5 The previous screen appears. To set the handling for a different error, repeat steps 3 and 4. Paper Output 8 Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The options are as follows. Output Tray Descriptions Top Tray Delivery on Top Tray of the machine. Finisher Tray* Delivery on Tray set to the optional built-in finisher or document finisher. Job Separator Delivery on the optional job separator. * Select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output. NOTE: The optional job separator, built-in finisher, or document finisher are required. FAX RX data output can be specified when the optional fax kit is installed. Use the procedure below to select the output tray. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Paper Output. 3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2. NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX). 8-13