Kyocera TASKalfa 300i 300i Operation Guide - Page 301
Secure Protocol, SSL Setup, IPP Security Setup
View all Kyocera TASKalfa 300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
Default Setting (System Menu) Secure Protocol Encrypt the communication between your PC and the machine using the SSL encryption. After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. The following Secure Protocol settings are available. • SSL Setup ...8-69 • IPP Security Setup ...8-69 • HTTP Security Setup ...8-69 • LDAP Security Setup ...8-70 SSL Setup Select whether or not to use SSL. The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Next] of SSL. 3 Press [On] or [Off]. 4 Press [OK]. 8 5 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. IPP Security Setup Select the IPP security level. This setup is available when SSL is On. The default setting is IPP over SSL Only. NOTE: IPP must be set to [On] in Protocol Detail on page 8-66. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network, [Next] of Secure Protocol, and then [Change] of IPP Security. 3 Press [IPP over SSL Only] or [IPP or IPP over SSL]. 4 Press [OK]. 5 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. HTTP Security Setup Select the HTTP security level. This setup is available when SSL is On. The default setting is HTTPS Only. 8-69