Kyocera TASKalfa 300i 300i Operation Guide - Page 274
Print Density, Drum Refresh, Default Setting System Menu, Adjustment/Maintenance
View all Kyocera TASKalfa 300i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Default Setting (System Menu) Print Density Adjust print density. Adjustment can be made in 5 levels. Use the procedure below to adjust the print density. 1 Press the System Menu key. 2 Press [ ], [Adjustment/Maintenance] and then [Change] of Print Density. 3 Press [1] - [5] (Lighter-Darker) to adjust density. 4 Press [OK]. Drum Refresh Refresh the drum when image blur or white spots appear on images in copies. There are 2 drum refresh modes. Item Drum Refresh 1 Drum Refresh 2 Description Use this mode when images are blurred or smeared. Refreshing takes about 160 seconds. Use this mode when white spots appear on images. Refreshing takes about 90 seconds. NOTE: Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done. When you run [Drum Refresh 2], the machine makes a vibrating sound for about 90 seconds until drum refreshing is completed. The toner soiling on the ejected paper is normal and does not indicate a fault. To use [Drum Refresh 2], load Ledger or A3 size paper into the Multi Purpose tray. Use the procedure below to refresh the drum. 1 Press the System Menu key. 2 Press [ ], [Adjustment/Maintenance]. 3 Press [ ] and then [Next] of Drum Refresh 1 or Drum Refresh 2. 4 Press [Execute] to perform Drum Refresh. 5 After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen. Auto Drum Refresh Auto Drum Refresh may be executed when the machine is turned on the power or recovered from the low power mode or sleep mode. Auto Drum Refresh is executed automatically to keep the best image quality by monitoring its peripheral temperature and humidity. 8-42