Kyocera TASKalfa 300i 300i Operation Guide - Page 50

Preparation before Use Setting Date and Time Follow the steps below to set the local date and time at the place of installation. When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used. NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and press [Login]. Refer to Adding a User on page 11-5 for the default login user name and password. Be sure to set the time difference before setting the date and time. If you change Date/Time setting, trial functions will be unavailable. For details, refer to Optional Functions on page 8-75. 1 Press the System Menu key. Date/Timer - Time Zone Set time zone. Select the location nearest you. Time Zone -12:00 International Date Line West -11:00 Midway Island, Samoa -10:00 Hawaii -09:00 Alaska -08:00 Pacific Time (US & Canada) -07:00 Arizona Status 2 Press [ ], [Date/Timer] and then [Change] of Time Zone. 3 Select the region. NOTE: Press [ ] or [ ] to view the next region. Summer Time 1/13 Off On Cancel OK 08/08/2009 10:10 4 Press [Off] or [On] of Summer Time and press [OK]. NOTE: If you select a region that does not utilize summer time, the summer time setting screen will not appear. 5 Press [Change] of Date/Time. 2-12