Kyocera TASKalfa 4551ci Fax System (W) Operation Guide Rev-2.2013.1 - Page 54
Canceling Communication, Cancelling Memory Transmission (while originals are being scanned)
View all Kyocera TASKalfa 4551ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
FAX Operation (Basic) > Canceling Communication Canceling Communication The method for cancelling communication with this machine differs depending on the transmission method (memory transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained here. Cancelling Memory Transmission (while originals are being scanned) During memory transmission, to cancel scanning while originals are being scanned, press the [Stop] key on the operation panel, or press [Cancel] on the touch panel. Scanning of originals is canceled, and the originals are ejected. When originals remain in the document processor, take them out from the original output table. Cancelling Memory Transmission (during communication) During memory transmission, to cancel communication after it has started following the completed scanning of originals, use the following procedure. NOTE You can cancel transmission by disconnecting the telephone line. For details, refer to Cancelling Transmission (Disconnection of Communication) on page 3-17. Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the receiving party. Check with the receiving party to see if pages were accidentally sent. 1 Press the [Status/Job Cancel] key. 2 Press [Sending Jobs]. 3 Select the job you want to cancel, and press [Cancel]. When the cancel confirmation screen appears, press [Yes]. Communication is canceled. Status Status Scheduled Job Job Type All Job No. Accepted Time Type Destination 438 14:47 0123456789 User Name Log Status InProcess 1/1 Cancel Printing Jobs Status Priority Override Sending Jobs Storing Jobs Device/ Communicate Detail Paper/ Supplies Close 02/02/2013 10:10 Cancelling and Sending Delayed Transmissions (Queued) To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than waiting for the specified time, use the procedure below. 1 Press the [Status/Job Cancel] key. 2 Press [Sending Jobs], and then [Scheduled Job]. 3-16