Kyocera TASKalfa 520i 420i/520i Operation Guide - Page 298

Default Setting (System Menu) 4 Press [Change] of DHCP. 5 Press [On] or [Off] of DHCP. When selecting [On], IP Address (Stateful) appears. 6 Press [OK]. 7 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-63. Protocol Detail The table below lists the network related function settings. The network related functions are available when TCP/IP is On. Item NetBEUI LPD SMTP (E-mail TX) POP3 (E-mail RX) FTP Client (Transmission) FTP Server (Reception) SMB Client (Transmission) i-FAX LDAP SNMP SNMPv3 HTTP Description Default Setting Selects whether or not to receive On documents using NetBEUI. Select whether or not to receive On documents using LPD as the network protocol. Select whether or not to send e-mail Off using SMTP. Select whether or not to receive e-mail Off using POP3. Select whether or not to send documents using FTP. When selecting [On], set the FTP Port Number. Use the FTP default port 21. On Port:21 Select whether or not to receive On documents using FTP. Select whether or not to send documents using SMB. When selecting [On], set the SMB default Port Number. Use the SMB default port 139. For Windows Vista, use 445. On Port:139 Select whether or not to use i-FAX. On Select whether or not to use LDAP. Off Select whether or not to communicate On using SNMP. Select whether or not to communicate Off using SNMPv3. Select whether or not to communicate On using HTTP. Restarting the System* Y Y N N Y Y N N N Y Y Y 8-66 OPERATION GUIDE