Kyocera TASKalfa 5500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 315
Default Setting System Menu, Function Defaults, Prevent BleedSend, Store,
View all Kyocera TASKalfa 5500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
Default Setting (System Menu) Use the procedure below to select the default Prevent Bleed(Send/Store). 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Prevent Bleed(Send/ Store). 3 Set the default Prevent Bleed(Send/Store). 4 Press [OK]. Zoom Select the enlarged/reduced default settings when paper size/sending size is changed after the originals are set. The available default settings are shown below. Item 100% Auto Description Copy (send/save) at actual size (100%). Automatically reduce or enlarge the originals to match the paper size/ sending size. Use the procedure below to select the default zoom setting. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] three times and then [Change] of Zoom. 9 3 Select the default zoom setting. 4 Press [OK]. Border Erase Default Set the default width to be erased as a border. The table below shows the measurement ranges that can be set. Input units Inch Metric Range 0 to 2" (in 0.01" increments) 0 mm to 50 mm (in 1 mm increments) NOTE: Refer to page 4-18 and page 6-26 for Border Erase. Use the procedure below to set the default border erase width. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Border Erase Default. 3 Press [+] or [-] for the Border and Gutter width to erase. You can use the numeric keys to enter the number directly. 4 Press [OK]. 9-21