Kyocera TASKalfa 5500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 389
NetWare, AppleTalk, Default Setting System Menu, Restart Network on TCP/IP Setting
View all Kyocera TASKalfa 5500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
Default Setting (System Menu) IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFF and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-101. Use the procedure below. The following procedure is an example for specifying the SMTP (E-mail TX) settings. 1 Press the System Menu key. 2 Press [System] ,[Next] of Network, [Next] of TCP/IP Setting and then [Next] of Protocol Detail to display the network settings screen. 3 Display the item you want to set and press [Change] for that item. In this example, press [Change] of SMTP (E-mail TX). 4 Press [On] or [Off]. 5 Press [OK]. NetWare Select the NetWare network connection. After that, select frame types for NetWare network from Auto, Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto". IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFF and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-101. Use the procedure below. 9 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of NetWare. 3 Press [On]. 4 Press the key for the frame type you want to use. 5 Press [OK]. AppleTalk Select the Apple Talk network connection. The default setting is On. IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFF and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-101. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of AppleTalk. 3 Press [On] or [Off]. 4 Press [OK]. 9-95