Kyocera TASKalfa 8000i 6500i/8000i Operation Guide Rev-1 2011.4 - Page 310
Punch Waste Full Error, Paper Mismatch Error, Inserted Paper Mismatch, Paper Jam before Staple
View all Kyocera TASKalfa 8000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
Default Setting (System Menu) Punch Waste Full Error Select what to do when the punch waste box becomes full during printing. Item Ignore Display Error Description Printing continues without punching. Error message to cancel printing is displayed. NOTE: This setting is displayed when an optional document finisher and a hole punch unit are installed. Paper Mismatch Error Select what to do when the selected paper size or type does not match paper size or type loaded in the specified paper source while printing from the computer by specifying the cassette or multi-purpose tray. Item Ignore Display Error Description The setting is ignored and the job is printed. Error message to cancel printing is displayed. Inserted Paper Mismatch Select what to do when it is detected that the cassette paper size setting does not match the actual paper size that is fed. Item Ignore Display Error Description Detection does not take place and the job is printed. Error message to cancel printing is displayed. Paper Jam before Staple The page from which printing is resumed when a paper jam occurs during a job with stapling can be selected. Item Resume at Top of Page Resume at Jammed Page Description Resume printing from the first page of the document. Resume printing from the page where the jam occurred. NOTE: This setting is displayed when an optional document finisheris installed. Use the procedure below to specify the settings for error handling. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Error Handling. 3 Press [Change] at the error for which you wish to change the handling. 4 Select the error handling method in the selection screen for each of the errors and then press [OK]. 5 The previous screen appears. To set the handling for a different error, repeat steps 3 and 4. 9-14