Kyocera TASKalfa 8000i 6500i/8000i Operation Guide Rev-1 2011.4 - Page 407
Login/Logout, Name@domain name in Login User Name.
View all Kyocera TASKalfa 8000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 407 highlights
Management User Login/Job Accounting - User Login User login administration. Select authentication method. Off Server Type Local Authentication Network Authentication Expansion Authentication NTLM Kerberos Ext. Domain Default Domain Host Host Name Status Cancel Add/Edit OK 10/10/2010 10:10 5 Select [Local Authentication] or [Network Authentication]. Select [Off] to disable user login administration. If you select [Network Authentication], enter the host name (62 characters or less) and domain name (256 characters or less) for the Authentication Server. Select [NTLM], [Kerberos] or [Ext.] as the server type. If you selected [Ext.] for the server type, enter the port number. NOTE: If the login user name and password are rejected, check the following settings. • Network Authentication setting of the machine • User property of the Authentication Server • Date and time setting of the machine and the Authentication Server If you cannot login because of the setting of the machine, login with any administrator registered in the local user list and correct the settings. Up to 10 domains can be registered for network authentication. 6 Press [OK]. Login/Logout Once you enable user login administration, a login user name and password entry screen appears each time you use this machine. NOTE: If the guest authentication setting is enabled, the authentication/logout key must be pressed when logging in. Login Use the procedure below to login. Enter login user name and password. Login to: Login User Name Local abcdef Login Password ******** Check Counter Status # Keys # Keys Cancel ID Card Login Login 10/10/2010 10:10 1 When the machine is operated and the next screen appears, select the authentication destination from the "Login to:" pull-down menu and press [Login User Name]. Press [# Keys] to enter the login data using the numeric keys. 2 Enter the login user name and press [OK]. NOTE: Refer to the Character Entry Method on Appendix-8 for details on entering characters. Authentication is possible without selecting an authentication destination by entering "Login User Name@domain name" in "Login User Name". 10 10-3