LG 26LH1DC5 Owner's Manual - Page 60
M.P.I. Communication Parameter. Selects Poll Rate
View all LG 26LH1DC5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
COMMERCIAL MODE (Continued from previous page) 029 - OLD OCV (On Command VideoTM) The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if Set to 1 for operation with systems from On Command Corporation. item 008 MIN VOLUME is also set at 0. Change values 030 - ACK MASK with ADJ Left/Right arrow keys. It may be best to set M.P.I. Communication Parameter. Leave at default setting the same value on every 26LH1DC3/4/5. unless changed by Pay-Per-View provider. When set to 1, *Note: The maximum volume level cannot have a value setting lower changes M.P.I. for some OCV boxes. than the MIN VOLUME level (described previously). 031 - POLL RATE 010 - MUTE DISABLE M.P.I. Communication Parameter. Selects Poll Rate for Enables or disables sound mute function. If set to 1, M.P.I. Leave at default setting unless changed by sound cannot be muted, mute is disabled. If set to 0, Pay-Per-View provider. Step size of 16 ms. sound can be muted. 032 - TIMING PULSE 011 - KEY DEFEAT (Keyboard Defeat) M.P.I. Communication Parameter. Leave at default setting If set to 1, key defeat prevents the end user from unless changed by Pay-Per-View provider. Sets baud rate. accessing the onscreen menus with the display front Step size of 4.3 uS. panel-MENU, SELECT, and Left / Right arrow keys and TV/AV do not function. If set to 0, those keys do function. *Note: The menus can always be accessed by pressing MENU on the 034 - CAMPORT EN. (Camera Port Enable) Set to 1 to enable Video 2 input on display panel. If set to 0, Video 2 input on display panel is not functional. Installer remote. 035 - COMPPORT EN. (Computer Port Enable) COMMERCIAL MODE 015 - SLEEP TIMER If set to 1, the SLEEP TIMER feature may be used. If set to 0, the Sleep Timer is not available. Enable/disables display panel HDMI input jack. Set to 0 to disable, set to 1 to enable. *Note: The setting above is ignored if Installer item 093 RJP AVAIL ABLE, is set to 1. 016 - EN TIMER (Enable On/Off Timers) If set to 1, Timer function is available to user. Set to 0 to disable On/Off Timer functions. (Clock must be set in order to use Timers.) 038 - YPrPb EN. (Rear Component Video Enable) Set to 1 to enable display panel rear Component Video 1 input. Set to 0 to disable display panel rear Component Video 017 - ALARM 1 input. Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm function is available to end user. Set to 0 to disable the Alarm function. *Note: Clock must be set before the Alarm function will work. 039 - REAR AUX EN. (Rear Aux Enable) Set to 1 to enable display panel rear AUX (Video 1) input. Set to 0 to disable display panel rear AUX (Video 1) input. 021 - V-CHIP (Parental Control) Set to 1 to activate V-Chip (Parental Control); have it available to end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn V-Chip feature Off, not available to user; no programming restrictions can be set. 040 - AUTO CAMPORT Set to 1 to automatically switch to Camport when equipment is connected to front Video input. Set to 0 to disable front Video automatic source selection. *Note: This item must be set to 0 in order to enable item 093 RJP 022 - MAX BLK HRS (Maximum Block Hours) AVAILABLE to be set to 1. Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours. 046 - STRT AUX SRCE (Start Aux Source) Sets the starting AUX source. Start source if start channel =0 023 - CAPTION LOCK 1 = Video1 4 = RGB1 7 = Video 3 / S-Video Set to 1 to restore previous caption On/Off state after 2 = Video2 5 = Component 2 255 = Last Aux turn Off. If set to 0, captions are always Off at turn 3 = HDMI 1 6 = Component 1 On. (Continued from previous page) 047 - AUX STATUS Set to 1 for M.P.I. AUX source to be reported as a 028 - CH. OVERIDE (Channel Override) channel number instead of channel 0. Set to 0 to If set to 1, the user can select channels with either disable AUX identification change. Channel up/down or by direct keypad entry. If set to 0, Controls M.P.I. status channel response for AUX inputs. only those channels that are added on the channel list can be selected. (Continued on next page) 60