LG 52LB5D Owners Manual - Page 106

Data 5: The table above lists the binary code which must be converted to Hexadecimal before sending. For example: 25. Channel Add/Del (Command: m b) To add and delete the channels The binary code to tune the sub source to an NTSC cable channel is "1000 0001 ", which translates to "81" in Hex. * 7th bit : For which source do you want to change the channel. * 6th bit: Use a two part or one part channel. Most cases just use 0 since it's ignored when using NTSC. * 5th bit: Use 0 with NTSC since it can only use the physical channel number. Normally use 1 for ATSC since most times it doesn't matter what the physical number is. Transmission [m] [b][] [Set ID] [ ] [Data] [Cr] Data 0: Channel Delete Data 1: Channel Add AcknowledgemenL [b][ ][Set ID][ ][0K/NG] [Data] [x] 26. Key (Command: m c) To send IR remote key code. TransmiSsion [m] [c][ ][Set ID][] [Data] [Cr] Data Key code: Refer to page 98. AcknowledgemenL [c][ ][Set ID][ ][OK/NG] [Data] [x] * 4th bit: Set to 0. * 3-0 bits: Choose signal type. 27. Back Light (Command: m g) (Only LCD TV model) To adjust screen back light. * Tune Command Examples: TransmissiOn[m] [g][] [Set iD] [ ] [Data] [Cr] 1. Tune to the analog (NTSC) cable channel 35. Data Min: 0 - Max: 64 (*transmit by Hexadecimal code) Data 0= Physical of 35 = 23 Data 1 & 2 = No Major = 00 00 Data 3 & 4 = No Minor = 00 00 Data 5 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01 *Refer to 'Real data mapping 1'. See page 102;. -O Acknowledgement[g][] [Set ID] [ ] [OK/NG] [Data] [x] -O m Z E3 X 2. Tune to the digital (ATSC) local channel 30-3. Data 0 = Don't know Physical = 00 Data 1 &2 = Major is 30 = 00 1E Data3 &4=Minoris3 = 0003 Data 5 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 ACknoW!edgemeni [a][ ][set ID][] [OK] [Data0] [Data]] [Data2] [Data3] [Data4] [x] [a] [] [Set ID NG] [DataO] [x] 105