LG A907GMS Owners Manual - Page 11
Wall Installation, Uninstalling the Station
View all LG A907GMS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CAUTION • To avoid product damage or personal injury, take care not to drop the product parts while unpacking them. • Do not use the double-sided tape on wallpaper. The weight of the charging station and the product could damage the paper. • We recommend anchoring the station with the anchoring screw. • If attaching to concrete or a wall stud, use the setscrew without a wall anchor. • If attaching to drywall, drill a hole and insert the wall anchor first. Note: • Once assembled, the charging station support and base cannot be disassembled. • The charging station can be removed as needed. After unscrewing it from the wall, pull the station upward while the bottom of the station remains upright on the floor. Wall Installation 1 Insert the power cable into the jack at the back of the charging station and plug the power cord into the power outlet. 2 Hold the station 3.25 ft (1 m) from the floor and near enough to easily reach the power outlet. Mark the positions of the screw holes on the wall. Insert the wall anchors at the marks, if needed. • Recommended diameter of hole: Φ6.5; Recommended depth: 60 mm. 3 Use the 2 shorter wall anchoring screws provided to attach the charging station to the wall. Wall anchoring hole Wall anchor Wall anchoring screw Uninstalling the Station If the station is not installed, separate the extension pipe and nozzle from the body before storing or charging the product. CAUTION • Resting the product on a flat surface for a long time with the extension pipe and nozzle attached may damage the product. Note: • The cost of a service call to properly install the charging station is not covered under the warranty. 11