LG A907GMS Owners Manual - Page 17

3 Clean the exhaust filter with a brush or running water. • To maintain cleaning performance, remove the dust from the exhaust filter at least once a month. • Allow the exhaust filter to dry out of direct sunlight in a well-ventilated place. Reinstalling the filter before it is completely dry may result in mildew or odor. 4 Clean the pre-filter with a brush or running water. • Allow the pre-filter to dry out of direct sunlight in a well-ventilated place. Reinstalling the filter before it is completely dry may result in mildew or odor. • The more often the filters are cleaned, the more optimal the suction power will be. • Filters are consumables. Please purchase more filters from an authorized service center. WARNING • Never wash the product body with water. Water may reach the motor and cause electric shock or fire. • Keep foreign objects away from the motor to avoid product damage, explosion or fire. • Do not insert fingers or sharp objects into the motor enclosure to avoid product damage, personal injury, or electric shock. CAUTION • Make sure to reattach the exhaust filter and prefilter to the product after washing them. Using the product without these filters will allow dust to reach the motor inside the product and cause malfunction. Note : • Dust buildup reduces the suction power, so for best results, make sure the filters are clean each time you use the product. ※ Removing foreign objects from inside the product In order to maintain product performance, be sure to remove any foreign objects and dust from inside the product (body, extension pipe, inlets). Foreign materials inside the product can cause the product to shut down during operation, generate noise, or cause poor suction. Foreign objects Pre-filter Product body Product body Foreign objects Pre-filter WARNING • Allow the pre-filter to dry completely before using it. Water from a damp filter could reach the motor and cause product failure, an electric shock or fire. 5 Reassemble the pre-filter first. Then align the exhaust filter with the hollow circle at top and turn the filter clockwise until the solid white circles align. Foreign objects Extension pipe Inlet port Foreign objects Foreign objects ※ If the inside of the product body, extension pipe, or inlet port is clogged with foreign objects, the power automatically turns off to protect the product. Separate the battery from the product and remove the foreign objects. 17