LG BX327 User Manual - Page 24

Function SCREEN Menu Options To Change PJT Mode * This function turns the projected image upside down or flips horizontal. 1. Press the Q.MENU button on the remote control. 2. Press the ＜, ＞ buttons to move to PJT Mode. 3. Press the ∧, ∨ button to select a desired item. • Select Rear when projecting from the back of the transparent screen purchased separately. • Select Ceiling when installing the product on the ceiling. • When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. PJT Mode Front Using Aspect Ratio Function Press the RATIO button to select a desired screen size. Aspect Ratio 4:3 Just Scan Set By Program 16:9 Cinema Zoom1 Zoom 16:9 • Some options may not be available depending on input signals. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. Using Keystone Function * Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. * Only use the Keystone function when you can't get the best angle of projection. 1. Press the KEYSTONE button of remote control. 2. Press the ＜, ＞ button to adjust the screen condition as you want. • Keystone can be adjusted from -40 to 40. • You can use this function through the MENU button. • Press the BACK button to exit the menu screen. •Keystone 0 ꔗ - +ꔃ ꔉOK Auto Configure Function * This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image. * Auto configure function works in RGB PC input only. Press the AUTO button of the remote control. • If you execute screen adjustment for a video from PC graphic signal, optimal state may not be found. Execute the Auto Config. function for a still image. • You can use this function through the MENU button. Auto config. 24