LG BX327 User Manual - Page 38

USB < How to use > 1. Press the MENU button. Then, move to OPTION with the buttons and press the ◉OK button. 2. Press the ∧, ∨ buttons to move to Network Setting and press the ◉OK button. 3. Press the ＜, ＞ buttons to move to On of LAN option. OPTION Menu Language Blank Image Screen Capture Lamp Mode Monitor Out Set ID Network Setting High Altitude 3D Mode ꔂMove ꔉOK ND: Eoentywgooluirskhwdanoet stonoretseexti?st. : Blue LAN : Normal ꔗ Off ꔃ : RGB1 IP Auto Setting : 1 IP Manual Setting : Off Close 4. Press the ∧, ∨ buttons to move to IP Auto Setting or IP Manual Setting press the ◉OK button. • In most cases, you should select Auto. If you are using a router it will automatically set the IP address. • Select IP Manual Setting for ordinary PC. - Setting PC: Set the Internet Protocol (TCP/IP) of the PC at your own discretion. Setting Projector: Set IP Address as the IP Address format of PC, and select Close after entering the Gateway as the same Gateway of PC. Please refer to eZ-Net Manager Guide for details of network setting. :: example :: IP Address Subnet Mask Gateway PC 192.168.0.10 255.255.255.0 192.168.0.1 Projector 192.168.0.254 255.255.255.0 192.168.0.1 < When select IP Manual Setting > IP Address ꔌ 192 168 ꔍ Subnet Mask ꔁMove ꔉOK 000 254 255 255 255 000 Gateway 192 168 000 001 Close • If Network Setting is not working, check your network conditions. Check the LAN cable connection. • If the Network Setting is not completed, network functions may not operate normally. • IP Auto Setting: Select it if there is a DHCP (Dynamic Host Configuration Protocol) server on the local area network (LAN) via wired connection, the Projector will automatically be allocated an IP address. The IP address will automatically be determined. Connection to DHCP may not be possible when the firewall is installed or according to the model of the computer. IP Manual Setting: Select it if there is no DHCP server on the network and you want to set the IP address manually. • Press the BACK button to exit the menu screen. High Altitude Mode * High Altitude Mode is used when the environment is higher than 1200 meters. 1. Press the MENU button. Then, move to OPTION with the ∧, buttons and press the ◉OK button. 2. Press the ∧, ∨ buttons to move to High Altitude and press the ◉OK button. 3. Press the ＜, ＞ buttons to move to On and press the ◉OK button. • Press the BACK button to exit the menu screen. INFORMATION Menu Options OPTION Menu Language Blank Image Screen Capture Lamp Mode Monitor Out Set ID Network Setting High Altitude 3D Mode : English : Blue : Normal : RGB1 : 1 : Off ꔂMove ꔉOK To See The Projector Information 1. Press the MENU button. Then, move to INFORMATION with the buttons and press the ◉OK button. 2. You can see the current information of the projector. • Press the BACK button to exit the menu screen. 38 INFORMATION Model Name Lamp Time Input Resolution Fh/Fv IP Address : BX327-JD : 12 Hr : RGB1 : 1024 x 768 : 48.36 Khz/60 Hz : 223.212.145.0