LG BX327 User Manual - Page 5

Safety Instructions Power WARNING Never touch the power plug with a wet hand. This may cause an electric shock hazard! Do not plug-in too many items into one power outlet. Prevent dust from collecting on the power plug pins or outlet. It may result in overheating of the out- This may cause a fire hazard! let and create a fire hazard! Power NOTES Hold the plug firmly when unplugging. If you pull the cord, it may be damaged. This may cause a fire hazard! Do not use if the power cord or the plug is damaged or any part of the power outlet is loose. This may cause a fire or an electric shock hazard or damage to the unit! Ensure the power cord does not come into contact with sharp or hot objects. This may cause a fire or an electric shock hazard or damage to the unit! Place the projector where people Do not turn the projector On/Off by plugging-in or unplugging the will not trip or tread on the power power plug to the wall outlet. cord. (Allow the unit to cool before removing power.) This may cause a fire or an electric shock hazard or damage to the unit! It may cause mechanical failure or could cause an electric shock. Using WARNING Do not place anything containing liquid on top of the projector such as flowerpot, cup, cosmetics or candle. This may cause a fire hazard or damage to the unit! In case of impact shock or damage to the projector switch it off and unplug it from the power outlet and contact an authorized service center. This may cause a fire or an electric shock hazard or damage to the unit! Do not allow any objects to fall into the projector. This may cause an electric shock hazard or damage to the unit! If water is spilt into the projector unplug it from the power supply immediately and consult your Service Agent. This may cause an electric shock hazard or damage to the unit! Dispose of used batteries carefully and safely. In the case of a battery being swallowed by a child please consult a doctor immediately. Do not remove any covers. High risk of Electric Shock! Don't look directly into the lens when the projector is in use. Eye damage may occur! Do not touch metal parts during or soon after operation since the vents will remain very hot! CAUTION concerning the Power Cord It is recommend that most appliances be placed on a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by authorized service personnel. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. 5