LG DLEX3885W Owners Manual - Page 19

INSTALLATIONINSTRUCTIONS CONNECTING GAS DRYERS (cont.) WARNiNG: To reduce the risk of fire, electric shock, or personal injury when using this appliance, follow basic precautions, including the following: • Installation and service must be performed by a qualified installer, service agency, or the gas supplier. Failure to do so can result in fire, explosion, or death. Use only a new stainless steel flexible connector and a new AGA=certified connector. Failure to do so can result in fire, explosion, or death. A gas shutoff valve must be installed within 6 ft. (1.8 m) of the dryer. Failure to do so can result in fire, explosion, or death. The dryer is configured for Natural Gas when shipped from the factory. Make sure that the dryer is equipped with the correct burner orifice for the type of gas being used (Natural Gas or Liquefied Petroleum). Failure to do so can result in fire, explosion, or death. • if necessary, the correct orifice (for the LP orifice kit order part number 4948EL4002B} should be installed by a qualified technician and the change should be noted on the dryer. Failure to do so can result in fire, explosion, or death. = All connections must be in accordance with local codes and regulations. Failure to do so can result in fire, explosion, or death. Gas dryers MUST exhaust to the outdoors. Failure to do so can result in fire, explosion, or death. Connecting the Gas Supply O Make sure that the gas supply to the laundry room is turned OFR Confirm that the type of gas available in your laundry room is appropriate for the dryer. The dryer is prepared for Natural Gas with a % - inch NPT gas connection. _t Remove the shipping cap from the gas connection at the back of the dryer. Be careful not to damage the threads of the gas connector when removing the shipping cap. O Connect the dryer to your laundry room's gas supply using a new flexible stainless steel connector with a % - inch NPT fitting. O Securely tighten all connections between the dryer and your laundry room's gas supply. Turn on your laundry room's gas supply and check all pipe connections (both internal and external) for gas leaks with a noncorrosive leak-detection fluid. Electrical Connection Plug dryer into a 120 VAC, 60 Hz grounded 3-prong outlet. 3/8" NPT Gas Connection AGA!CSA-Certified Stainless Steel Flexible Connector ,1/8" NPT Pipe Plug Supply Shutoff Valve Hig#-Altitude Installations The BTU rating of this dryer is AGA-certified for elevations below 10,000 feet. If your gas dryer is being installed at an elevation above 10,000 feet, it must be derated by a qualified technician or gas supplier. 19 MFL62512806 EN 0208.indd 19 2010.2.8 2:7:5 PM