LG DLEX3885W Owners Manual - Page 41

T OU LESHOOTING BEFORE CALLING FOR SERVICE {cont.) Steam doesn't generate but no error code is shown. Garments still wrinkled after STEAMFRESH,M. There are no creases left on garment after STEAM FR ESH'M. Garments have static after REDUCE STATIC. Garments are too damp or too dry after REDUCE STATIC. Garments are not uniformly damp after EASY IRON. Water drips from door during Steam Cycle. Steam is not visible during Steam Cycle. Drum does not turn during Steam Cycle. Cannot see steam vapor at the beginning of cycle. The display shows BULKY LOAD. Odors remain in clothing after STEAMFRESH TM. CHECK FILTER light is on during the drying cycle 2 bars are displayed in the LCD screen. • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. • This is normal. • Correct drying options not selected. • This is normal. • This is normal. • This is normal. • This is normal. • This is normal. • MORE TIME button pressed. • STEAMFRESH TM did not remove odor completely, • Lint filter is almost clogged or full. • Ductwork is slightly too long or has too many turns/restrictions. Partial blockage of the ductwork due to lint buildup. 4 bars are displayed in the LCD screen. Ductwork is too long or has too many turns/restrictions. Significant blockage of the ductwork due to lint buildup or debris. Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Select load weight manually before starting REDUCE STATIC option. = Depends on the amount or type of garments. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a large load such as a comforter. • Fabrics containing strong odors should be washed in a normal cycle. • Pause the drying cycle and clean the lint filter. • install a shorter or straighter duct run. See the installation instructions. Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. If "END OF CYCLE" is displayed after the end of cycle, it will be off in 4 minutes. If POWER button is pressed or the door is opened, power will be off immediately. Install a shorter or straighter duct run. See the Installation instructions. Ductwork should be checked/cleaned soon. Dryer can be used in this condition, but drying times may be longer. If "NEED FLOW CHECK" is displayed after the end of cycle, it will be off in 2 hours. If POWER button is pressed or the door is opened, power will be off immediately. J 41 MFL62512806 EN 0208.indd 41 2010.2.8 2:7:54 PM