LG DLG2524W Owners Manual - Page 17
it to center
View all LG DLG2524W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Important : use 3-wire connection in the places such as mobile homes and areas where 3-wire connections is not available. Prepare minimum 5ft(1.52m) of length in order for dryer to be replaced. First, peel 3 '/2 inch (8.9cm) of covering material from end and bare 1 inch from the ends. Then, put the hooked shape end of the wire under the screw of the terminal block(hooked end facing rightward) and pinch the hook together and screw tightly. 1. Connect neutral wire(white) of power cord to center terminal block screw. 2. Connect red and black wire to the left and right terminal block screws. 3. Make sure that the strain relief screw is tightened and be sure that all terminal block nuts are on tight and power cord is in right position. connector • If your local codes or ordinances do not allow the use of a 3 wire connection, or you are installing your dryer in a mobile home, you must use a 4wire connection. (N4-wirereceptacle EMA type 14-30R) nt plug _1 NeeG/°/pdoP rg ng _ SPtadeetcer2nic_awlsith nt pl_p(1o.v9e_Im{rai n relief d0P_ong Ring terminals Center terminal block screw(silver) Neutral grounding wire(white) Neutral wire (white or center wire) Strain relief Green wire of power cord External ground connector 1. Connect neutral wire(white) of power cord to center terminal block screw. 2. Connect red and black wire to the left and right terminal block screws. 3. Connect ground wire(green) of power cord to external ground screw and move neutral ground wire of appliance and connect it to center screw. 4. Make sure that the strain relief screw is tightened. and be sure that all terminal block nuts are on tight and power cord is in right position. 17