LG DLG2524W Owners Manual - Page 7

electrical connections - service manual

Page 7 highlights

The following instructions will help guide you through the initial steps of setting up your dryer for use. Please note that every section of this manual provides important information regarding the preparation and use of your dryer, and it is important that you review this entire manual before proceeding with any installation or use. More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are provided at other parts of this manual. Choose a location with a solid floor for your dryer. Place the dryer at least eighteen inches above the floor for a garage installation. After placing the dryer in the desired location, please confirm that the dryer has the required clearances through reference to the following information and manual sections on Exhaust Requirements and Maintenance. If you are installing your dryer in a manufactured or mobile home, please refer to STEP 9 below for additional instructions. 38.7" (98.3 crn) 27 68.6 cm) 29.6" (75.3 cm) Certain minimum clearance are required above,behind, and to the sides of the dryer in the ever you install it any closer of other recessed area. Those required minimum clearances are set forth in the picture below. Please also keep the following instructions in mind when installing in a closet or recessed area: • Consider allowing additional clearance t_r installation and servicing. • Wall,door and flow molding may require additional clearance. • Additional space of linch (2.5cm) is recommended an all sides in order to reduce noise transfer. • Consider space needed t_r companion appliances. • For closer installation, the picture below shows the minimum required ventilation openings t_r the door. A louvered door with comparable ventilation openings are also acceptable. 3 _t iiiii_il (310 cm_) 24 *'2 iiiiiiii iiiii_il iiiii_il iiiii_il iiiii_il iiiii_il iiiii_il iiiii_il iiiii_il iiiii_il iiiii_il iiiiill iiiiill iiiiill * Most installations require a minimum 5 1/2in. (14 cm) clearance behind the dryer for the exhaust vent with elbow. (2.54 cm) (75.3 cm) (2.54 cm) 0 (0 cm) (68.6 cm) (0 cm) 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

The following instructions
will help guide you through the initial steps of setting up your dryer for use.
Please note that every section of this manual provides important
information regarding the preparation
and
use of your dryer, and it is important
that you review this entire manual before proceeding with any
installation or use. More detailed instructions
concerning
electrical connections,
gas connections,
and
exhaust requirements
are provided at other parts of this manual.
Choose
a location
with
a solid
floor
for your dryer.
Place
the dryer
at least
eighteen
inches
above
the
floor
for a garage
installation.
After
placing
the
dryer
in the
desired
location,
please
confirm
that the
dryer
has the
required
clearances
through
reference
to the following
information
and
manual
sections
on
Exhaust
Requirements
and Maintenance.
If you
are installing
your dryer
in a manufactured
or
mobile
home,
please
refer
to STEP
9 below
for
additional
instructions.
38.7"
(98.3 crn)
27"
---"=_""_'---
29.6"
(68.6 cm)
(75.3 cm)
Certain
minimum
clearance
are required
above,behind,
and to the sides
of the dryer
in
the
ever
you install
it any closer
of other
recessed
area.
Those
required
minimum
clearances
are set forth in the picture
below. Please
also keep
the
following
instructions
in
mind
when installing
in a
closet or recessed
area:
Consider
allowing
additional
clearance
t_r
installation
and servicing.
• Wall,door
and flow molding
may require
additional
clearance.
• Additional
space
of linch
(2.5cm)
is recommended
an
all sides in order
to reduce
noise
transfer.
• Consider
space
needed
t_r
companion
appliances.
For
closer
installation,
the picture
below
shows the
minimum
required
ventilation
openings
t_r
the door.
A louvered
door with comparable
ventilation
openings
are also acceptable.
3 _t
iiiii_il
(310 cm_)
iiiiiiii
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiii_il
iiiiill
iiiiill
24 *'2
iiiiill
* Most
installations
require
a minimum
5 1/2in.
(14 cm)
clearance
behind
the dryer
for the
exhaust
vent
with elbow.
<Closet door>
(2.54 cm) (75.3 cm)
(2.54 cm)
<Closet-Side
view>
0
(0 cm)
(68.6 cm)
(0 cm)
<Closet-Front
view>
7