LG DP885 Owner's Manual (English) - Page 7

DP382-N_AUSALLR_MFL48000402 3/28/08 4:35 PM Page 7 Power connections Connecting the Power Cable Connect the supplied power cable from the unit to a power socket. y Right side of the unit v- Plug into the car's cigarette lighter socket. Right side of unit Plug into the "DC 9V IN" jack. Plug into a power source. Plug into the "DC 9V IN" jack. Automotive adapter • This automotive adapter operates on DC 8.5-16V. • Contact an electrical parts distributor for assistance in selecting a suitable automotive adapter. • Manufactured by GRAND POWER ELECTRONIC TECHNOLOGY (SHENZHEN) CO., LTD. * The actual set may differ from the drawing. Caution • To prevent electrical shock and possible damage to your unit or vehicle, . always unplug the automotive adapter from the cigarette lighter socket AC adapter before you remove the plug from your unit. • This AC adapter operates on 100-240V~ 0.5A 50/60Hz. • A 1.5 amp. 250V fuse for protection is installed in the automotive adapter. • Contact an electrical parts distributor for assistance in selecting a suitable • While the engine is being started, disconnect the automotive adapter from AC plug adapter or AC cord set. the car's cigarette lighter socket. • Manufactured by I-MAG ELECTRONICS CO., LTD • Do not operate your unit when the car battery is discharged. Peak current from the car generator may cause the DC fuse to blow. Connect the Automotive adapter • If the vehicle's supply voltage drops below approximately 10 volts, your unit may not work properly. This unit and its automotive adapter are designed for use in vehicles that have • Do not leave your unit in a place where the temperature exceeds 70°C 8.5-16 volt, negative ground electrical systems. This is standard for most vehi- (158°F), or the pick-up device may be damaged. cles. If your vehicle has a different type of electrical system, the DC power sys- Examples include: tem cannot be used. - Inside a car with the windows closed and in direct sunshine. - Near a heating appliance. 7